WaterCompared

Water report · not indexed

What is in the water at 76522

3 public water systems serve this ZIP code in the federal records. Everything below comes from EPA monitoring data, and everything missing is named.

CITY OF COPPERAS COVE

PWSID TX0500001 · TX · serves 37,225 people

PFAS and lithium

5 compounds detected at or above the reporting limit under EPA’s UCMR 5 monitoring, across 9 samples.

CompoundHighest detectedSamplesMost recent
PFBA0.0063 µg/L28/24/2023
PFHxS0.0043 µg/L38/24/2023
PFOS0.0041 µg/L18/24/2023
PFBS0.0035 µg/L18/24/2023
PFPeA0.0033 µg/L22/21/2024

A detection is a measurement, not a violation and not a health finding. EPA states that UCMR 5 results do not indicate compliance or non-compliance with any limit.

Health-based violations

No open health-based violation on record. This covers MCL, treatment technique and MRDL violations in SDWIS that have not been returned to compliance. It excludes monitoring and reporting violations, which are the large majority nationally, so this is not “no violations”, and SDWIS completeness varies by state.

Hardness

No hardness measurement. Hardness is measured at environmental monitoring stations, and none fell inside this system’s service area. That is a gap in where monitoring happens, not a finding about the water.

MULTI-COUNTY WSC

PWSID TX0500044 · TX · serves 4,302 people

PFAS and lithium

3 compounds detected at or above the reporting limit under EPA’s UCMR 5 monitoring, across 5 samples.

CompoundHighest detectedSamplesMost recent
PFBA0.015 µg/L38/30/2023
PFPeA0.0046 µg/L18/30/2023
PFHxA0.0038 µg/L18/30/2023

A detection is a measurement, not a violation and not a health finding. EPA states that UCMR 5 results do not indicate compliance or non-compliance with any limit.

Health-based violations

3 open health-based violation(s) recorded in SDWIS and not yet returned to compliance.

  • MCL · contaminant code 2950 · began 2025-10-01
  • MCL · contaminant code 2950 · began 2026-01-01
  • MCL · contaminant code 2950 · began 2026-04-01

Hardness

No hardness measurement. Hardness is measured at environmental monitoring stations, and none fell inside this system’s service area. That is a gap in where monitoring happens, not a finding about the water.

KEMPNER WSC

PWSID TX1410028 · TX · serves 17,721 people

PFAS and lithium

4 compounds detected at or above the reporting limit under EPA’s UCMR 5 monitoring, across 8 samples.

CompoundHighest detectedSamplesMost recent
lithium14 µg/L22/27/2025
PFBA0.0094 µg/L18/28/2024
PFBS0.0036 µg/L22/27/2025
PFPeA0.0035 µg/L38/28/2024

A detection is a measurement, not a violation and not a health finding. EPA states that UCMR 5 results do not indicate compliance or non-compliance with any limit.

Health-based violations

No open health-based violation on record. This covers MCL, treatment technique and MRDL violations in SDWIS that have not been returned to compliance. It excludes monitoring and reporting violations, which are the large majority nationally, so this is not “no violations”, and SDWIS completeness varies by state.

Hardness

No hardness measurement. Hardness is measured at environmental monitoring stations, and none fell inside this system’s service area. That is a gap in where monitoring happens, not a finding about the water.

What this report cannot tell you

Every figure describes water at a sampling point: a treatment plant, an entry point to the distribution system, or a monitoring station. None of it describes water arriving at your tap. Plumbing between the two can add lead and copper, and if your home was built before 1986 a test kit tells you something no federal dataset can.

Sources: EPA UCMR 5 occurrence (final release, frozen July 2026) · EPA SDWIS health-based violations · USGS and state monitoring via the Water Quality Portal · EPA Public Water System Service Area Boundaries v3. Compiled 2026-09-01.